Diy Over The Toilet Cabinet: A Perfect Way To Maximize Your Bathroom Space

Over The Toilet Storage Ideas for Extra Space Hative
Over The Toilet Storage Ideas for Extra Space Hative from hative.com

Introduction

Bathrooms are often the smallest rooms in our homes, and it can be a challenge to make the most of the limited space. One solution to this problem is to build an over the toilet cabinet. It not only provides additional storage, but it also gives a great look to your bathroom. If you’re looking for an easy and affordable way to increase your bathroom storage, then this DIY over the toilet cabinet project is just what you need.

Materials

Before you begin, you’ll need to gather some materials. Here’s a list of what you’ll need:
  • 1/2 inch plywood
  • 1x2 inch boards
  • Table saw
  • Circular saw
  • Jigsaw
  • Kreg Jig
  • Drill
  • Wood glue
  • Screws
  • Sandpaper
  • Paint or stain

Step-by-Step Guide

Step 1: Cutting the Plywood

First, you need to cut the plywood. Measure the length of the toilet tank and the width of the toilet. Cut the plywood according to these measurements. You will need two pieces of plywood for the sides, one for the top and one for the bottom.

Step 2: Cutting the 1x2 inch Boards

Cut the 1x2 inch boards into four pieces, two for the sides and two for the front. The length of the boards should be the same as the height of the plywood.

Step 3: Assembling the Cabinet

Using the Kreg Jig, drill pocket holes into the plywood and the 1x2 inch boards. Then, assemble the cabinet by attaching the sides to the top and bottom using screws. Attach the front 1x2 inch boards to the sides using wood glue and screws.

Step 4: Cutting the Shelves

Measure and cut the shelves to fit inside the cabinet. You will need two shelves. Sand the edges of the shelves to make them smooth.

Step 5: Installing the Shelves

Using the Kreg jig, drill pocket holes into the sides of the cabinet. Attach the shelves using screws through the pocket holes.

Step 6: Finishing Touches

Sand the entire cabinet to smooth out any rough edges. Then, paint or stain the cabinet according to your preference.

Tips

  • Measure twice, cut once. Double-check your measurements before making any cuts.
  • Use a Kreg Jig to create strong joints and ensure your cabinet is sturdy.
  • Choose a paint or stain that is waterproof to protect your cabinet from moisture in the bathroom.

Conclusion

Building a DIY over the toilet cabinet is an easy and affordable way to add storage to your bathroom. With a few basic tools and materials, you can create a custom cabinet that fits perfectly in your space. Follow these steps and tips to create a functional and stylish cabinet that will maximize your bathroom storage.

Post a Comment

Previous Post Next Post
close